Pool Table Playing Bed Specifications
These pool table playing bed specifications are provided by Billiard Congress of America.
Pool Table Sizes
Pool Table Bed Height
Pool Table Pocket Openings & measurements
Pool Table Playing Bed
Pool Table Cushion
Pool Table Ball Specifications
Pool Table Cue Specifications
Playing Bed
The playing surface must be capable, either by its own strength or a combination of its strength and that of the table base frame, of maintaining an overall flatness within ' .020" lengthwise and ' .010" across the width. Further, this surface should have an additional deflection not to exceed .030" when loaded with a concentrated static force of 200 pounds at its center. All slate joints must be in the same plane within .005" after leveling and shimming. The bed must be covered with a billiard fabric, the major portion of which is made of wool, with proper tension to avoid unwanted ball roll-off. It is recommended that professional tournament size tables have a three-piece set of slate with a minimum thickness of 1" and a wooden frame of at least 3/4" attached to slate. BCA will sanction tournament play on home and coin operated tables with one-piece slate providing the Play Area requirements are met. All playing surfaces must be solidly secured to base frame with screws or bolts.
